USING BITWARDEN WITH THE NEW SOFTWARE NEED HELP

[PAT FRANKOWICZ]

I CAN'T PAIR BITWARDEN WITH ATX NEED AS MUCH HELP AS I CAN GET,,,

[jklcpa]

1. Install ATX on your system.
2. Download the authenticator to your mobile device.
3. Open ATX 2024 and create your password. It should bring up a screen with the QR box to scan and a box to enter the initial authenticator code.  Leave this screen open and go to #4.
4. On your phone, open the authenticator and click the + button and point the camera at the QR box.  It should scan the QR and automatically set up "ATX 2024...."  and generate a numeric code to enter into the ATX program. This is the initial code that pairs your software with your mobile device.  Enter that code into the box in the ATX software that you opened in step #3.  It should be paired now.

 

From then on when you open ATX, you will enter your password and then it will ask for a 6-digit code from the authenticator.

Open the authenticator and look for the one that says "ATX 2024" and it should have the 6-digit code to enter.  That code is good for 30 seconds and will automatically refresh every 30 secs.

Make sure the clocks on the computer and the mobile device are the same, otherwise the codes will not be in sync and may not work because of the 30 second refresh rate.

[BulldogTom]

7 minutes ago, jklcpa said:

1. Install ATX on your system.
2. Download the authenticator to your mobile device.
3. Open ATX 2024 and create your password. It should bring up a screen with the QR box to scan and a box to enter the initial authenticator code.  Leave this screen open and go to #4.
4. On your phone, open the authenticator and click the + button and point the camera at the QR box.  It should scan the QR and automatically set up "ATX 2024...."  and generate a numeric code to enter into the ATX program. This is the initial code that pairs your software with your mobile device.  Enter that code into the box in the ATX software that you opened in step #3.  It should be paired now.

 

From then on when you open ATX, you will enter your password and then it will ask for a 6-digit code from the authenticator.

Open the authenticator and look for the one that says "ATX 2024" and it should have the 6-digit code to enter.  That code is good for 30 seconds and will automatically refresh every 30 secs.

Make sure the clocks on the computer and the mobile device are the same, otherwise the codes will not be in sync and may not work because of the 30 second refresh rate.

For someone who uses Drake, Judy has a lot of knowledge about ATX.   Thank goodness.   She should have written the instructions for ATX.

Tom
Longview, TX